Stop Facebook Notification Email

I think all of you have Facebook account. It is great, but a few things about the service drive all of you crazy.
     For example, when you leave a comment on someone else wall. Facebook emails you every time someone else put comments on the same wall. This can lead to a considerable amount of junk email i.e. unwanted email.
Luckily you can turn off these Facebook notifications.
Steps:
1. Login to Facebook.
2. Click Account and then Account Settings.
3. Click the Notifications tab.
4. Scroll around until you find the Wall Comment Section.
5. Clear the checkbox (the one for email) next to Comments after you on a Wall Story.
6. Click Save Changes at the bottom of the page.

Speed up your connection

Note: This following tip will not work on XP Home Edition.
1. Make sure you're logged on as actually "Administrator". Do not log on with any account that just has administrator                
privileges.
2. Start > Run > type gpedit.msc (not available in home version).
3. Expand the Local Computer Policy branch.
4. Expand the Administrative Templates branch.
5. Expand the Network branch.
6. Highlight the "QoS Packet Scheduler" in left window.
7. In right window double click the "limit reservable bandwidth" setting.
8. On setting tab check the ENABLED item.
9. Where it says "Bandwidth limit %" change it to read 0 (ZERO).
10. Close gpedit.msc.


Effect is immediate on some systems, some need to re-boot.

Open Blocked Websites….

Open Blocked Websites…. Steps are described as follows :-
 1. Go to Google
 2. Type transparent free proxy address free
 3. Click on the transparent proxy fresh transparent proxy list
 4. Look for a proxy address with port 8080
 5. Now go to tools menu of internet explorer
 6. Go to internet options
 7. connections tab
 8. click Activate use a proxy server for ur LAN options
 9. Put that number that you found in the website with 8080 port and hit Ok
10. Again Ok Now open any websites. ………..Enjoy Moments of Life Make it Large
            You can also open Blocked Websites with the help of this link:  flyproxy
                       

Make Folders Invisible Without Using Any Software

Make Folders Invisible Without Using Any Software As you can guess with this trick you can make your folders invisible without using any software. This is a very unusual & easy trick to make your private folders invisible to others. A folder contains two parts; an icon and a name.So to make the folder invisible you will have to make both the icon & the name invisible. These are the steps to do that.
1. For Making The Name Invisible Select the folder which you want to make invisible. Press F2 key then type ALT+0160 and hit enter key. You will notice that the name of the folder has become invisible. See the snapshot below.
2. For Making The Icon Invisible Right click on the folder whose name you made invisible. Go to Properties, then go to the Customize tab. Then click on the Change Icon button. Select any blank icon there. Remember there will be many blank icons (see snapshot). Just choose any one.Click OK. your folder is invisible now (without any software). Now only you know where the folder is located. Enjoy.

Stopping Unneeded Startup Services

Stopping Unneeded Startup Services Heres the way to stop unneeded programs from startup. Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot. To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. You can do that by entering the command “msconfig” in the run menu. Start Run “msconfig” (without quotes) || Hit Enter The Services tab shows you the services that start when the computer boots. You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question. Open Control Panel Administrative Tools Services or Start Run “services.msc” || Hit Enter Take a quick look at common services you may want to live without.

How to auto restart Windows Xp and Vista in case of System Failure

How to auto restart Windows Xp and Vista in case of System Failure Windows Blue Screen of Death in both of Xp and Vista are the most terrible thing which happens when there is a system failure and machine comes to an halt. The next you do is power down the machine and start it manually. However you can change this to make it restart automatically after the dump is created instead of waiting.
* Right click on My Computer
* Click Properties
* Click on settings of System and Recovery. 
* Remember this place is you can configure what the system will do when it gets into system failure. 
* Just check the check box which says Automatically restart Now the next time your computer goes for a system failure it will auto restart. But You will have to wait for the dumb to get created. Moreover you can also check for Overwriting the old dump file in case you want to save some space.

How to Get Windows Vista To Startup Faster

How to Get Windows Vista To Startup Faster Getting Windows Vista to startup faster is a simple process of just optimizing your computer to startup the programs or applications you want. This is how you can do it very simply.
Step 1.  Go to the “Start” button on your desktop and left click on it. 
Step 2.  Go the search box and in there write “defender” and press enter. 
Step 3.  The Windows Defender window will pop up and in there just select where it says “Tools”. 
Step 4.  Move down where it says “Software Explorer” and select that. 
Step 5.  While in the “Software Explorer” window move over to the “Category” box and select the “Startup Programs” option. 
Step 6.  A list of the programs that startup with Windows Vista will appear on the left hand side. Just select the ones you feel do not need to startup with Windows Vista. These programs are programs that you might have installed yourself or things like Quicktime, iTunes, Word, and RealPlayer, and so on. 
Step 7.  Do not remove programs that are necessary for the startup to Windows Vista. Now the next time your computer restarts you will only load up the programs you wanted to making your startup time much faster. Congratulations and happy computing.

Speed Up SATA Hard Drives & USB Drives In Windows Vista

Speed Up SATA Hard Drives & USB Drives In Windows Vista Window Vista has built in support for SATA and external drives, but they seem to be slow because the advanced write cache features aren’t automatically activated. With just few steps you can enable them and get a much faster response. First you need to go to the Device Manager which you can go directly by just typing device in the start menu search box or just type in devmgmt.msc in command line. Now open the Disk drives section and right click on your hard drive. Now click on the Policies tab and you’ll find this dialog box: Now click the checkbox for Enable advanced performance, and you are done. Write caching isn’t enabled by default as removing devices directly without using the “Safely remove removable device”may lose your data, so be cautious when enabling this options. But enabling this option also when speeding up performance significantly when writing to the disk. Now select the external drive and double click it to open up the properties screen. Then just change the setting to “Optimize for performance” and hit OK to continue. You’ll have to reboot for all the settings to take effect. Next time you boot into Windows Vista you’ll see faster bootup times and better disk writing performance.

Secret China Mobile Phones Codes

The following Mobile Phones codes works with various China mobile Phones such as Alkatel, Sigmatel, Karbonn, GFive, and more such China Mobile phones..

• Default user code : 1122, 3344, 1234, 5678
• Engineer mode : *#110*01#
• Factory mode : *#987#
• Enable COM port : *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
• Restore factory settings : *#987*99#
• LCD contrast : *#369#
• Software version : *#800#
• Software version : *#900#
• Set default language : *#0000# Send
• Set English language : *#0044# Send
• Set English language (new firmware) : *#001# Send

Some useful trick for a PC/Laptop

If virus was infection on our PC/Laptop then it gives a some symptoms.
these are :-
-Task Manager is not allowed
-Run and Search Button was not in your Start Button
and such as this symptoms
How to enable our Task manager And Run & search button
go to run and type gpedit.msc
choose user configuration tab
-click Administrative Templates
-click System folder
-click "Atl+ctrl+Del" folder
-click "remove Task Manager"
-and choose "not configured"
-and click okey
-if you you want to enable Run & Search button on Start then follow same instruction one is change
-choose Desktop folder the from of "system Folder".
Thank you !!

Make A TIME Trial version SOFTWARE to full version {EASILY}

I SEEN MANY TUT'S AND AND THEN I HAD AN URGE TO WRITE MY OWN TUT my brother told me this and now i am writing this in this forum . sorry for my bad English i am not American .

this trick will be more useful for skiddies and small boys not for pro-hackersCool

this trick does not work on all kind of games and software's but its 90% reliable
this trick doesn't work on big games eitherBlush

have you ever had an experience when you download a game from the net and if you install it you get to know that it a demo and is only for 60 minutes or 30 days(maximum)...... well i had this kind of situation several times . i got a new Cd's of games but i only find it to be 30 days of gaming. but i found this trick and get to know how to use the game who have all files with it but a temporary lock is there to use it for just 30 days .

OK NOW HERE"S THE TRICK

*first change your PC date back to 40 years or so . Like if my PC date is 1/7/2011 then i will change it to 1/7/1971 or 1/7/1950 etc.

* then install the game,software,application etc.

*please don't use any second of the game yet

*change your PC date back to original (means if you changed your PC date from 1/7/2011to 1/7/1950 in first step you just change it back to 1/7/2011)

*run the game it will give some error but it will work fine
i have tested this trick hundreds of times it works absolutely fine.

Have fun guys...........

All new mobiles unlock code !!

SAMSUNG

t 209 unlock 100%ok
try it:Make sure to use a SIM card that is not accepted by that phone!

Enter reset code first?
*2767*3855# let it reboot

then enter...
*7465625*638*00000000*00000000# (to change NCK code to 00000000)

then enter...
#7465625*638*00000000# (to permanently unlock the phone


D807 NETWORK LOCK
I have tested this with my D807 and it works.

1. If you have changed your phone password, change your password back to the default 8 zeros (00000000).
1a. NOTE (Modification here by my experience): Goto SETTINGS, SECURITY, then SIM LOCK and disable this before proceeding.
2. Put a SIM card that is from a network other than the one your phone is locked to (I used a TMOBILE card from my buddy Darin)
3. When Incorrect SIM (I got invalid card and there was a sim card graphic spinning) error comes up, type *#9998*3323#.
4. White screen will appear with an exit option. Press the right softkey. (I ended up pushing the down key to get a menu)
5. From the menu that appears, select the Malloc Fail option. This will reboot the phone and the normal service screens will appear.
6. Type *0141# and then press the green call key. "Personalization" or "Personalized" will appear.
7. Turn off your phone and put the original SIM back in.
8. Turn on your phone. You will receive a prompt to enter a password.
9. Type 8 zeros (00000000) (This is because the SIM LOCK Mentioned earlier gets switched back on)
10. Completed. You have now unlocked your phone.



D807 CONTACT TRANSFER
.....................
I did some searching and found out that with the studio software from samsung you are able to edit and move contacts from your phone to the sim and back. Or copy from the phone and put them on the sim card. Just thought you all should know as there is no menu option on the phone.


************************************************** **************************************************

SPICE:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
USER UNLOCK CODE:1122

************************************************** **************************************************
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send

************************************************** **************************************************
LG:
KG300 NVRAM format: 2945#*# -> menu 15


************************************************** **************************************************

SONY ERICSSON
I was speaking with a Sony Ericsson development tech today and he's given me some great codes!!

Write down your IMEI number. You can get this with the following:

*#06#

Then, you need to get into the Personalize menu with the following keypress:

< ** <

(Left, Star,Star, Left)

You then will need to select the Network at the top ( This will be locked )

It will ask for the code (the one that everyone asks for) and you need to enter in the following:

7993XXXX (where XXXX is the FIRST FOUR digits of your IMEI Number)

It will report an error and reduce your lock count by 1. Don't worry about this.

Repeat the process and enter the following:

6309XXXX ( where XXXX is the SECOND FOUR digits of your IMEI Number)

Again, it will reduce by one. Repeat again with the next two numbers:

093167XX ( where XX is the 9th and 10th digits of your IMEI Number)
323343XX ( where XX is the 11th and 12th digits of your IMEI Number)

And finally, you will need to repeat the process just one more time. This is very important, you will need to enter the following code:

XXXXYYYY - Where XXXX is the SECOND FOUR digits of your IMEI and YYYY is the FIRST FOUR digits of your IMEI.

You have to be careful, there are a few steps to follow, but these are the codes that the technicians use to unlock and test the phones that they have in for R & D.

I was very excited when I got these and it worked perfectly. I have unlocked two phones now, both K608i - One that was with Optus (Australia) and the other with Three (Australia) without any problem



************************************************** **************************************************


MOTOROLLA - F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Samsung:
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#

Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#

Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Rename Multiple files at once

When you download photos from your digital camera, they often have unrecognizable names. You can rename several similar files at once with the following procedure. This also works for renaming other types of files.

1.Open the My Pictures folder. (Click Start, and then click My Pictures.) Or open another folder containing files that you want to rename.

2.Select the files you want to rename. If the files you want are not adjacent in the file list, press and hold CTRL, and then click each item to select it.

3.On the File menu, click Rename.

4.Type the new name, and then press ENTER.

All of the files in the series will be named in sequence using the new name you type.

For example, if you type Birthday, the first will be named Birthday and subsequent files in the series will be named Birthday (1), Birthday (2), and so on.

To specify the starting number for the series, type the starting number in parentheses after the new file name. The files in the series will be numbered in sequence starting with the number you type.

For example, if you type Birthday (10), the other files will be named Birthday (11), Birthday (12), and so on.

I have lot more cool tips to share with you all... But unfortunately, this is my 5th thread of today and I cant share it until tomorrow. Let me wait... lol

Well, until then this is Arun, signing off from Minute Workers.

Have a pleasant day my dear friends.

Speed up the Boot Menu

Tired of waiting thirty seconds to start up Windows 2000 Professional or Server if you don't select from the boot menu? Speed up the booting process by only showing the available operating systems for just a couple of seconds.
        Right-click "My Computer" on the desktop and choose "Properties". On the "System Properties" multi-tabbed dialog box that follows, click "Advanced". Click the "Start up and Recovery..." button. Then, on the "Startup and Recovery" dialog box that follows, next to "Display list of operating systems for ... seconds", select the number of seconds that you want the computer to wait before continuing with the default OS. When you're done, press "OK" to close the dialog box.
     You can also take the information with the help of this link.
http://www.youtube.com/watch?v=UrZoHlmrle4
http://www.youtube.com/watch?v=ebtkqMaIDK4

How To Disable XP Boot Up Screen

              How many times do you find yourself staring mindlessly at the boot screen during Windows startup? I couldn’t even estimate the total amount of time I have wasted staring at the flowing blue bar. Here I will cover the steps to eliminate XP’s boot up screen. Not only will it save you the pain of staring at Microsoft’s logo, but it may actually shave a bit of time off the booting process. 
In demonstrating this quick and simple tip, I am using XP Professional SP3. First click Start >> Run and type in ‘msconfig’ (without the quotes) and click OK.
            The System Configuration Utility will open, now click on the BOOT.INI tab. From the list under Boot Options place a check mark next to “NOGUIBOOT” and click OK.
              You will then be prompted to restart, and when you do the familiar XP boot up screen will be long gone! This will only work for Windows XP.
       
 http://www.youtube.com/watch?v=DaiCPKO7QN4

Increase Your Virtual RAM

• If your HD has less than 20GB of free space left then don't do this.
            Alright, this is how you do it:
 Instructions:
1. Right Click on "My Computer" icon and select "Properties".
2. Click on the Advanced tab.
3. Under Performance, click Settings.
4. Then click the Advanced tab on the button that pops up.
5. Under Virtual Memory at the bottom, click Change.
6. Click the Custom Size button.
7. For the initial size (depending on your HD space), type in anywhere from 1000-1500 (although i use 4000), and for the Maximum size type in anywhere from 2000-2500 (although i use 6000).
8. Click Set, and then exit out of all of the Windows.
9. Finally, restart your computer.
10. You now have a faster computer and 1-2gb of virtual RAM!
http://www.youtube.com/watch?v=B8FNXEFG9LQ
http://www.youtube.com/watch?v=2vdnTfolGgY

Increase the speed of your slow internet connection

      Today broadband internet connection is available in all the major cities, but in some area people are still using slow dial-up internet connection. So don’t worry, you can enjoy your dial-up internet connection faster than its normal speed using internet accelerator. The Web Accelerator application designed to provide the full acceleration for your routine web sites browsing. With the help of Web Accelerator you can browse your internet 4 to 6 times faster than normal dial-up connection. Basically this services compressing the website text data, images and heavy graphics to open or download this data with high speed.
            This technique is more useful for static websites and for email applications but don't accelerate with secure and downloading audio or video files. Some good web accelerator retains your system cache to reuse websites with faster speed and can also block windows pop-up. If you are using FTP sites and downloading any program using dial-up, then web accelerator is not for you. There are various web accelerator software are free available on internet, visit and download it to enjoy your connection
http://www.youtube.com/watch?v=Xf3TsWDtxEc
http://www.youtube.com/watch?v=QYu5WBp47Ks

Blackberry Tricks

Hold Alt + N+M+L+L=(Decibel meter)=Displays signals power in decibels instead of bars.
Press V,A,L,D =Address Book file verification= Check the data in your address book.


Hold Alt & Press R,B,L,D=Address Book data structure rebuild=Forces a data structure re-build in the Address Book

Holding Alt and press R,B,V,S=View source code=Display the Webpage source code.

Help Me! menu.
Provides crucial technical information about your device, for when seeking technical
Hold “Alt” and (left) “shift”, then press “H”.
IMEI display.
Displays your device’s international mobile equipment identity (IMEI – your serial number)

on-screen… Also works from all other GSM handsets.
Type “*”, “#”, “0″, “6″, “#” on the Home screen.
“Soft” reset.
Performs a “soft” reset of your device; the equivalent of doing a “battery pull” (ie.

Remove the battery for a few seconds).
Press-and-hold “Alt”, then press-and-hold (left) “shift”, then press-and-hold “Del”.
Event Log.
Displays event logs of all the system-level events that occur on your device…
Hold “Alt” and press “L”, “G”, “L”, “G”.
All of these secrets have been tested on the BlackBerry 8800 and BlackBerry Curve 8300; .
In some cases, you will need to be on the Home screen when you enter these codes…
Various Key shortcuts:
A or C = phonebook
S = search
F = phone profiles
W or B = browser
H = help
K = locks the keys
L = calendar
V = messages
M = messages folder
R = alarm
T = tasks
U = calculator
I = applications
O = options
P = phone
Some new additions thanks to the contributions in this thread:
T – Top of page (in browser)
B – Bottom of page (in browser)
Space – Page down (in browser)
ALT + Right Shift + Del = hard reset
D – Memo pad
U – Switch between hide/unhide in title bar (in browser)
ALT + NMLL = numbers instead of bars for signal strength.

Hide Folder And File In Mobile

Do you want to hide your folder and file in your mobile without any software.Then follow steps mention below.
1. First of rename your folder with “.jad” extension.For eg- images.jad
2.In the same directory make same folder images but with “.jar” extension.For eg- images.jar
3.That’s it your original images folder ( images.jad) will be hide and images.jar will be same with no data.
4.To again access original folder (images.jad) just remove .jar from images.jar.
Simple .Enjoy

How to improve your dialup modem performance?

Click Start the button.
Select Settings.
Click Control Panel.
Double-click on the Modems icon.
Select your modem.
Click the Properties button.
Click the Connections tab.
Click the Advanced button.
In the "Extra settings" field, type S36=7
Click OK to save your settings.

http://www.youtube.com/watch?v=4SiW-TdMMBw

CHANGE YOUR PC PROCESSOR NAME

THIS IS ONE OF THE MY BEST TRICK WHICH
I M SHARING TO YOU

OK START
1ST
GO TO

START>

RUN>

TYPE REGEDIT>

HKEY_LOCAL_MACHINE>

HARDWARE>

DISCRIPTION>

SYSTEM>

CENTRAL PROCESSOR>

ON RIGHT HAND SIDE RIGHT CLICK ON PROCESSORNAMESTRING AND THEN WRITE ANYTHING U WANT IN THAT TEXTBOX

Manually Remove a Trojan Virus

If your computer is infected with Trojan horse virus, worry not, for here we tell you how to remove a Trojan virus. If you do not want to use the options available online for the removal of the Trojan, you will have to undertake the process of removing the virus manually. To remove Trojan virus manually, you will have to first identify the system files, which are infected by the virus. The next step in Trojan horse virus removal is to erase the files so that normal functioning of the system is possible. You can seek help from online forums or antivirus software websites.

Make Window7 Bootable with usb flash drive

Requirements:

*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.



Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.



5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:



Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment
http://www.youtube.com/watch?v=98xlSjTyCaQ
http://www.youtube.com/watch?v=mwX9cmJ8BoM&feature=related

Remove Autorun Virus

1)Open command prompt. Go to Windows, then Run, and type "cmd" . Press enter.

2)Type "cd\" and press enter to get to the root directory of c:\ .

3)Type "attrib -h -r -s autorun.inf" and press enter.

4)Type "del autorun.inf" and press enter.

5)Repeat the same process with other drives, type "d:" and do the same thing. then next "e:".and restart your computer.

6)Restart your computer and it's done. Enjoy the freedom to open hard drives on a double click.

How to Update an iPod Touch

The iPod Touch is a portable media player produced by Apple that has many of the same features as an iPhone. The device allows users to connect to a WiFi network, surf the Internet, send and receive email, and download and watch movies or listen to music. Similar to personal computers, the Apple engineers are constantly making corrections and adding functionality to the iOS that runs the software applications installed on the iPod Touch. When there are enough upgrades created, the company releases a software or firmware update for the device. When this occurs, a common task for end-users is updating the iPod Touch.

Steps to Update the iPod Touch
Step 1 – Open the iTunes application on the computer that you synch with the iPod Touch.

Step 2 – Check to ensure the version of iTunes on the computer is the latest version by selecting the “iTunes” and “Check for Updates” menu options from the “File” menu bar.

Step 3 – Select the “Click Download iTunes” menu option if an update is available on the subsequently displayed screen. Your computer’s “Software Update” screen will then open displaying other available applications that have updates available. You do not have to download other programs other than the iTunes program from this screen.

Step 4 – Exit from iTunes and install the new version of iTunes on your computer (if required).

Step 5 – Start iTunes after the installation is completed and then connect your iPod Touch to the computer using the white data cable that came with the device which connects to the USB port on your computer.

Step 6 – Select the iPod Touch on the left-hand side bar.

Step 7 – Select the “Check for Update” menu button under the “Summary Tab.”

Step 8 – Click the “Update” menu button if a new update is available.

Step 9 – Leave your iPod Touch connected to the computer while the new update is installed. After the update is complete, you may disconnect the device, and it will be updated.

Trun your pen drive as a RAM

If your want to make your pen drive as a RAM, then Follow these steps :-

1. Insert the Pen Drive (1GB at least) in the USB port
try to prefer 4GB.
2. Let the PC do what it wants to do to detect it..
3. After it finished his work, you have to act smart,
4. Right Click on My Computer -> Properties
5. Advanced -> Performance Settings
6. Advanced -> Change
7. Select the Pen Drive
8. Click on Custom Size
9. Check the value of space available "
10. Enter the same in the Initial and the Max columns

" You just used the space of the PenDrive as a Virtual Memory "

Restart... Your PC is fast and furious

How to Enable or disable Remote Desktop

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

Using Group Policies (best practice)

1. Open Group Policy.
2. In Computer Configuration, Administrative Templates, Windows Components, Terminal Services,
double-click the Allows users to connect remotely using Terminal Services setting.
3. Do one of the following:
i. To enable Remote Desktop, click Enabled.
ii. To disable Remote Desktop, click Disabled.

If you disable Remote Desktop while users are connected to the target computers, the computers maintain their current connections, but will not accept any new incoming connections.

http://www.youtube.com/watch?v=duAH8Z87hMY

Connect Two Computers Together

One of the simplest ways to connect two computers together is with the use of ethernet cable. For this networking method to work, you need to have a network card installed on both the computers. These networking cards are placed in the PCI slots of the computer. The network card provides an ethernet port to the computer, which provides a facility to connect it with other computers.

So to connect two computers together using an ethernet cable, make sure that both computers have a networking card and if they do not, then buy them and get them installed. Choose a network card which provides high data transfer rate. Buy an ethernet cable. Plug one end of that cable into the ethernet port of the first computer and plug the other end into the ethernet port of another computer. Make sure that you connect the ethernet cable properly into the ethernet port and hear it clicking into place on both sides.

Next, you must switch on the two computers and go to the network settings. I am assuming that you have a windows operating system installed. In case you have any other operating system, run its equivalent network set up utility program. Create a network using the 'set up advanced network' option by logging in as the administrator. Make sure that you don't forget to specify that you are creating this network without a router and directly connecting computers. Name the computer you have logged in as the 'host' while the other computer as the 'guest' and do the same on the other one.

If you are asked to create a network set up disk then create one and run it on the other computer to transfer the network settings. Turn file sharing 'on', when given a choice. Click on properties of drives or folders and enable sharing on network. That should do the trick and enable your two-computer network. Read more on home computer networking tips.

How to Connect Two Computers Together With USB Cable?
You can connect two computers together by another method, which is by using a USB cable. Here is what you need to do. First you need to install the driver software for the USB cable. Insert the installation CD in the drive of one computer and finish the driver installation. Choose 'Link Mode' in the installation process which enables you to transfer files between the two computers. If you choose the 'network mode', it will connect the computer on a network. Repeat the procedure of driver installation on the second PC. Then connect each end of the USB cable to the USB ports of each computer. With that done, your computers are linked for data transfer.

Nokia Mobile Default Codes

HERE ARE SOME NOKIA CODES

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best               sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR) .

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

*#4720# With this Nokia code you can deactivate the Half Rate Codec.

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .

*#9999# Phones software version if *#0000# does not work.

*#06# For checking the International Mobile Equipment Identity (IMEI Number) .

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .

*#147# This lets you know who called you last (Only vodofone).

*#1471# Last call (Only vodofone) .

*#21# This phone code allows you to check the number that "All Calls" are diverted to.

*#2640# Displays phone security code in use .

*#30# Lets you see the private number.

*#43# Allows you to check the "Call Waiting" status of your cell phone.

*#61# Allows you to check the number that "On No Reply" calls are diverted to .

*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .

*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330


*#73# Reset phone timers and game scores.

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop
Allowed", it means you will get the best standby time possible .

*#7760# Manufactures code.

*#7780# Restore factory settings.

*#8110# Software version for the nokia 8110.

*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

*#94870345123456789# Deactivate the PWM-Mem.

**21*number# Turn on "All Calls" diverting to the phone number entered.

**61*number# Turn on "No Reply" diverting to the phone number entered .

**67*number# Turn on "On Busy" diverting to the phone number entered .

12345 This is the default security code .

press and hold # Lets you switch between lines